Mercedes ELV Steering Lock Repair: Job Video

Watch C&D Locksmith work through a Mercedes steering-lock fault and check that the car starts again. This 1-minute, 23-second recording includes the technician’s original explanation.

The problem shown in the video

The technician describes a car that will not start because its electronic steering lock is not releasing. Later in the recording, he refers to a message telling the driver to remove the key from the ignition.

What the technician did

The recording follows the removal of the failed steering-lock unit, installation and programming of an emulator, and a final check in the vehicle. At the end, the technician demonstrates that the car is running again.

This is one documented repair. A no-start condition can have different causes, and the correct repair depends on the vehicle and diagnosis. The video does not establish compatibility for every Mercedes model or a guaranteed repair time.

What to have ready when you call

  • Your Mercedes model and year.
  • The exact dashboard message or symptoms.
  • Whether the key turns or is recognized, and whether the steering lock releases.
  • Your location and whether you still have a working spare key.

Call to confirm service availability, diagnostic options and an estimate. C&D Locksmith is based at 11 N J St, Suite 5, Lake Worth, FL 33460.

Call (561) 623-3664

Automotive locksmith services · More job videos

Read the video transcript

…start the video too late, but this is in a Mercedes ELV issue, so we’re going to take the steering column out, remove the steering wheel lock, and program an emulator because this won’t start. That was a tough one, but we got it out. Now we’re going to remove this part, put everything back, and connecting an emulator. And the car will be able to start, and no more steering lock issue. Okay, we’re back to the car. Steering lock is out. That’s the one [unclear]. [unclear]. When it got bad, the resistor right here is not spinning and it doesn’t release the steering lock. Okay, we got it all set, car is running, everything is good. The key, start the car, before it just give you a message of remove key out of the ignition. Those codes you had before, if you had some accident, I don’t know, but it’s up now.